Dance - Girl Essay Example for Free

Dance Girl Essay Dance, Girl, Dance is a film from the Classical Hollywood period that presents a complicated reading when viewed through a feminist lens. The 1940 film was directed by Dorothy Arzner, one of the most notable female directors and the only prominent woman in Hollywood at that time. Arzner presents her audience with an array of female characters, the main characters being Judy O’brien and Bubbles/Tiger Lily White. Judy is a dedicated dancer, honing her talents as a ballerina. Bubbles, on the other hand, uses her looks and sexuality to land jobs as a burlesque dancer. Dance, Girl, Dance reveals these characters’ experience in a dance troupe with several other girls. When the troupe disbands, Bubbles comes to offer Judy a humiliating job as her stooge. As tensions rise, the two eventually come to blows, quite literally, when both fall for the same man, Jimmy Harris. Through their relationship with each other and with men, a dynamic is defined that gives insight into the power of the male gaze and sexual politics, not only in the film but also in society at large in the context of 1930s America. This can be seen in the analysis of a particular scene near the beginning of the film. Judy and one of her roommates, Sally, are preparing for bed after their performance at the nightclub in the opening scene. Bubbles, their third roommate, arrives at home after a disappointing outing with Jimmy. This scene specifically highlights the contrast between the personalities of Judy and Bubbles, and speaks to the many ways female characters are coded based on their sexuality and appearance. The analysis of the scene begins at the moment Bubbles enters the room. She comes into the frame through the doorway in a medium shot. It is important to note her costume, as it speaks to her character. She is wearing makeup, jewelry, a fox fur stole around her shoulders and a feathered hat. One may get the impression that she is trying to look as glamorous or ostentatious as possible on her limited budget. At this point, Bubbles has already been partly established as a brash woman who does not shy away from her ability to attract men. This can be contrasted with Judy’s costume during this scene, modest button-up pajamas. The scene continues as Bubbles enters the tiny apartment. She turns on the light, when Judy whispers that Sally is asleep from off camera. Bubbles leaves the light on, looks down at Sally in the bed, and proceeds to loudly close the door while muttering â€Å"So, what? † As she delivers her dialogue, the camera follows her as she walks to her bed, panning over to include Judy in a two shot. One key element in this simple interaction is the difference of attitude toward female solidarity between Bubbles and Judy. Judy obviously cares to not disturb Sally, while Bubbles seems disappointed and only concerned with her own problems at this point. Then, the camera cuts to a close shot of Sally lying in bed, smiling and clearly awake. She then closes her eyes and continues to try and sleep, rendering her unimportant to the rest of the scene. The next cut brings us back to a long, two shot of Bubbles and Judy as they discuss what happened to Bubbles that evening. Bubbles is explaining how she had gone out with Jimmy, but he suddenly left her at the bar after giving her a little stuffed bull. In this shot, Bubbles is in the foreground, a little closer to the camera than Judy, making her appear slightly larger. This could be interpreted as signifying her social dominance over Judy, and the fact that she â€Å"stole† Jimmy from Judy earlier that evening. Bubbles dismissively tosses the bull onto a chair in front of Judy. Judy picks it up, stating â€Å"It’s cute. † Bubbles tells her that she can have it. The audience is clearly meant to get the impression that the token of the night has no significance to Bubbles, and she is merely disappointed that she could not add Jimmy to her list of men to dote on her occasionally. The camera stays stationary as Bubble walks to the background of the shot and sits on her bed. Judy gently places the bull back on the chair, already showing signs of her eventual fetishization of the bull and Jimmy. Then, she continues to bend and stretch her legs, as Bubbles pouts behind her. It is interesting to point out that as Judy resumes her exercises, she has gained the â€Å"high ground† of the shot. The reminder of her status as a dancer, a more artful and talented dancer than Bubbles, means she is the larger, more significant character in the frame now. The focus has moved from Bubbles proficiency as a female spectacle, completely at home under the male gaze, to Judy’s proficiency as a ballerina, with no real concern for superficial male attention. Then, this is reinforced when there is a cut to a medium shot of Bubbles, looking at Judy. The camera follows Bubbles line of sight and there is a quick cut to a medium shot of Judy, then it reverses back to the shot of Bubbles on her bed, shaking her head. She says, â€Å"I’ll say one thing for you, Pavlova. You’ve certainly got ambition, even if it’s dumb. † As she says this, Judy’s foot briefly enters from the side of the frame as she kicks her leg. Once again, Bubbles is coded as having no passion for her craft as a dancer, seeing it as a means to an end of attracting men and/or making money, while Judy genuinely loves to dance. One way of reading the film is through the suggestion that Judy’s ballet is high art, while Bubbles’ burlesque is low art. In the world of the Dance, Girl, Dance, women utilizing their sexuality for physical and financial gratification given by men is deemed less valuable than artistic expression. What follows is a short series of counter shots between the two, as Bubbles ponders how she will get back to New York, going through her list of male suitors to find a solution to her dilemma. On a surface level, this shows that Bubbles needs men to get where she is going, whether it is for a trip to New York or a trip to stardom as they buy tickets to her shows later in the film. The scene comes to a close as Bubbles decides on Sam, the traveling salesman that is â€Å"sweet on her. † As this line is delivered, there is a quick cut to Judy whipping her head around to look back at Bubbles. Judy has an expression on her face that is hard to describe, but it gets across the fact that her reality is very different from that of Bubbles’. Judy goes on to ask if there will be room for Sally, as the camera tracks Bubbles while she walks to the bathroom. As the camera stops tracking, it stops in a medium shot of Bubbles as she eventually replies, â€Å"†¦ All right, she can go, but don’t blame me. That guy’s got more arms than an octopus. † There is a cut to a close shot of Sally in bed with a wide-eyed, nervous expression as she quickly lifts up her head and plops back down. Like Judy, her reality is very different from the reality of the dynamic Bubbles, and the possibility of encountering a man from that reality seems to frighten her. After the last cut of the scene, it ends on a medium shot of Judy picking up the stuffed bull once again and smiling at it fondly. This emphasizes the fact Judy is not asexual and clearly is developing feelings for Jimmy. Although, Judy seems to have a more deep, emotional connection to Jimmy than Bubbles has for her various men. Judy only became interested in Jimmy after he helped the girls at the nightclub and talked with her earlier in the film. Her interest is not based solely on what he can provide to her. The differences in costume, behavior and motivation between Bubbles and Judy are relevant to a larger scope of the film involving sex and gender politics. For all of the above reasons found in the formal elements of the film’s visual and narrative composition, Bubbles is coded as superficial, purely physical and vapid. On the other hand, Judy is given much more value and depth. While Bubbles goes on to find success by exploiting her good looks, Judy is the winner in the end, when she lands her position in the ballet company and achieves her dreams. In this way, the film is sending a message that female self-worth is not derived from male approval or reaffirming of beauty, but from accomplishment of what are considered to be more substantial goals.

Technique to Facilitate Treatment of Urethral Strictures

Technique to Facilitate Treatment of Urethral Strictures Title:  A simple technique to facilitate treatment of urethral strictures with optical internal urethrotomy Konstantinos Stamatiou MD,PhD,Consultant Urologist, Urology Dpt, General Hospital Tzanio, Piraeus, Greece Aggeliki Papadatou MD, Radiology Resident, Radiology Interventional Radiology Dpt, General Hospital Tzanio, Piraeus, Greece Hippocrates Moschouris MD, Consultant Radiologist, Radiology Interventional Radiology Dpt, General Hospital Tzanio, Piraeus, Greece Corresponding author: Aggeliki Papadatou, General Hospital Tzanio, Zanni Afentouli 1 str, 18536, Piraeus, Greece Key words: urethral stricture, optical internal urethrotomy Introduction An urethral stricture is a narrowing of a section of the urethra. It causes a blocked or reduced flow of urine which can result in a range of manifestations, from asymptomatic to severe discomfort. Moreover, it can lead to serious complications such as urinary infections and renal insufficiency secondary to urinary retention. Blunt perineal trauma, urological instrumentation, chronic inflammatory disorders such as lichen sclerosus et atrophicus and sexually transmitted diseases are the most frequent causes of strictures; a large proportion are iatrogenic . Currently, three different interventions are used to treat urethral strictures: dilations, optical internal urethrotomy and open urethroplasty(1). Dilations are easy to perform in every day clinical practice, however they show the highest recurrence rates while their outcomes are the less satisfying to the patients. On the other hand, open urethroplasty shows the lowest recurrence rates and its outcomes are the most satisfying to the patients (2). Although it is the current gold standard against which the traditional treatments are compared, this technique requires skills, expertise and equipment, often not available in the resource limited settings. For the above reasons, most patients with urethral stricture are offered optical internal urethrotomy . This procedure is preferred as the first treatment option by many urologists, as it is performed within short operative times, under either spinal, or local anaesthesia. It can be also done as an outpatient procedure for the treatment of short urethral strictures . Optical internal urethrotomy is performed by a rigid urethrotome or a flexible cystoscope/urethrotome combination. The instrument is inserted and guided to the face of the stricture and a small blade at the tip of the instrument is deployed using a trigger mechanism to cut the stricture at locations determined by the surgeon. Upon completion of the internal incision(s), the instrument is withdrawn and an appropriately sized Foley catheter is inserted through the repair and into the urinary bladder. Hospitalization lasts 2 days and the patient keeps the catheter a few days . However, technical difficulties associated with poor visualization of the stenosis or of the urethral lumen may increase procedural time and substantially increase the failure rates of internal urethrotomy. In this report we describe a technique for urethral catheterization via a suprapubic, percutaneous approach through the urinary bladder. Case Report A 35-year-old male patient, presented to our urology department with a severe (> 5 cm), tortuous stricture of the penile urethra, previously diagnosed by descending cystourethrogram (Figure 1). A suprapubic catheter was in place. Technique The urinary bladder was filled with 300 millilitres of diluted iodinated contrast (contrast/normal saline: 1/3) via the suprapubic catheter. A 0035†, J-tip standard angiographic guidewire was inserted into the urinary bladder through the suprapubic catheter. The latter was removed and exchanged with a short (11 cm), 5-French angiographic sheath. The angiographic guidewire was subsequently withdrawn and a Cobra-1 angiographic catheter (5 Fr, 65 cm) loaded with a 0035, hydrophilic, J-tip guide-wire was inserted into the bladder. Under fluoroscopy, the catheter-guidewire combination was guided towards the internal urethral orifice and urethra was catheterized. The hydrophilic guidewire was used to negotiate the stricture and was finally advanced through the external urethral orifice (Figure 2). The angiographic catheter was subsequently advanced through the stenosis, over the guidewire (Figure 3). The hub of the catheter was cut off and the vascular sheath was removed. The posteri or part of the catheter is stabilized on the abdominal wall with a suture. The patient was then taken to the operating room and placed in lithotomy position, under spinal anaesthesia. By keeping the angiographic catheter stretched, the rigid urethrotome was inserted in the urethra (Figure 4) and directed to the face of the stricture. The blade at the tip of the instrument was deployed using a trigger mechanism to cut the stricture at the 12 o clock location along the entire length of the stenosis. Upon completion of the internal incision, the instrument was withdrawn and a Foley catheter was inserted through the repaired stricture and into the urinary bladder. Results Antegrade catheterization of the urethral stricture and subsequent treatment of the stricture by using the angiographic catheter as a guide for the urethrotome proved feasible. No urethral injury, false passage or development of fistula were observed. The fluoroscopically guided antegrade catheterization of the stricture lasted 11 minutes. The patient remains free of recurrence 7 months post-operation. Discussion Internal urethrotomy has advantages of ease, simplicity, speed and short convalescence. However, success rates vary and long term results are generally low. In the short-term (less than 6 months), success rates are 70 to 80 percent. After one year, however, recurrence rates approach 50 to 60 percent and by five years, recurrence falls in the range of 74 to 86 percent(4). Although different studies have proposed different etiologies as poor responders to optical internal urethrotomy, technical and anatomical factors such as reduced visibility during the operation and stricture length are uniformly recognised as predictors of recurrence . Other factors associated with treatment failure are the perioperative urinary infection, the presence of periurethral fibrosis (spongiofibrosis) and stricture etiology(5). In cases of severe urethral stenosis or excessive urethral tortuosity the actual site of the stricture may not be visible at all4. Intraprocedural bleeding, presence of blood clots, inflammatory or injured tissues add extra difficulty in localization of the stenosis and in safe advancement of the urethrotome. Retrograde instillation of methylene blue through the suprapubic catheter and/or antegrade advancement forwarding of an ureteral stent are usually used in order to visualise narrowed urethral lumen, or to guide the urethrotome through a tortuous urethra respectively. However both manoeuvres are of questionable effectiveness. In several cases the procedure is concluded in two sessions; in other cases a scar appears after urethrotomy (probably as a result of a false route of the urethrotome) and this causes a new stricture. The above may explain surgical success rates as low as 20% . To overcome these problems, we devised a technique which is based on percutaneous, trans-cystic catheterization of the urethra. The technique requires low-cost, widely available materials of interventional radiology and a fluoroscopy unit. The procedure is brief, well-tolerated and requires no anesthesia. Our initial experience showed that even a long and severe stenosis could be negotiated with rotational and gentle probing movements of the hydrophilic guidewire. Of note, we preferred to utilize the angiographic catheter instead of the guidewire as a guide for the urethrotome; compared to the guidewire, the angiographic catheter proved more stable, more efficient for straightening of the urethra and more easily visible endoscopically. References 1. Tritschler S, Roosen A, Fà ¼llhase C, Stief CG, Rà ¼bben H. Urethral stricture: etiology, investigation and treatments. Dtsch Arztebl Int. 2013;110:220-6 2. Wani BN, Jajoo SN, Bhole AM. Outcome of urethral strictures managed by general surgeons in a rural setting of India. Indian J Surg. 2011;73:336-40. 3. Kreder KJ, Stack R, Thrasher JB, Donatucci CF. Direct vision internal urethrotomy using topical anesthesia. Urology. 1993;42:548-50. 4. Jordan GH, Schlossberg SM, Devine CJ. Surgery of the penis and urethra. In: Walsh PC, Vaughan ED, Retik AB, Wein AJ, editors. Campbells Urology. Philadelphia: Saunders; 1998. pp. 3316–3394. 5. Wong SS, Aboumarzouk OM, Narahari R, ORiordan A, Pickard R. Simple urethral dilatation, endoscopic urethrotomy, and urethroplasty for urethral stricture disease in adult men. Cochrane Database Syst Rev. 2012;12:CD006934. Legends Figure 1 Descending cystourethrogram showing severe stenosis of the penile urethra (arrow). Figure 2 Demonstration of the technique after the replacement of the suprapubic catheter with the angiographic sheath (arrow). The angiographic catheter (dotted arrow) and the guidewire (arrowhead) have been inserted through the angiographic sheath into the bladder. The guidewire has negotiated the stenosis and has been externalized through the external urethral orifice. Figure 3 The angiographic catheter (dotted arrow) has been advanced across the stenosis over the guidewire. Figure 4 Endoscopic view of the angiographic catheter which served as a guide for the urethrotome.

People Express Airlines Case Study Essay -- Business and Management St

People Express Airlines Case Study Abstract: In the well documented case of the early low-fare and economy carrier People Express Airlines (PE) the common explanation for the rapid rise and decline is excessive corporate growth. Based on a dynamic resource based, this case finds that it is not only the rate of growth embodied in the resource buildup processes—which determines the outcome of a corporate growth strategy. â€Å"Despite the rapidly increasing financial problem by the spring of 1986, PE continued to win praise for its impact on the airlines industry and the value it offered to customers. But PE was fighting for market share all over the country. In Denver, United and Continental were destroying Frontier. Other airlines continued to entice customers away with low fares and more amenities†, (Pg18, Holland). People Express (PE)’s low fare and economy strategy did change in the speed of corporate growth and in other vital strategic decisions, like implementing a hub and new network and giving service to major airports but later it went down as PE try to grow faster and merge with other airlines. Could people express have been saved? Why or why not? People Express (PE) was the first airline that was opened in the time of US airline deregulation back in 70'. People Express was one of the most impressive business success stories in airlines business, growing to the nation's fifth largest air carrier by mid 80’s, â€Å"In 1985, its revenue were nearly $1 billion. By the end of...

My Summer Vacation in Florida Essays -- Summer Vacation Essays

Have you ever been on a vacation? To me a vacation is a time to be with friends or family. When I think of vacations, I think of packing, the flight or drive, and relaxation. Not only is it very exciting to go on a vacation, but you get closer to the people that go with you. Linda, my best friend's mom had asked me if I would want to go with their family to Florida. When she asked me I thought she was kidding, but when she said, "I need to know because if you are I need to get you a airplane ticket," I knew she was serious. I was so excited I could have kissed her. I was going to Florida with my best friend, Lisa, and her family. The people from Lisa's family that were going were Tina, Randy, Ashley, and Linda. Tina is Lis'?s sister, Randy is Tina?s husband and Ashley is Tina?s daughter. Linda is Lisa?s mom and she was the only one out of all Lisa?s family I knew. Going on a trip packing is defiantly a priority. The whole week before the trip I had began packing. I didn?t realize how many things I was going to need until I started packing. I packed two suit cases full of clothes, but I figured I?d rather have more clothes because you never know what the weather will be like. I packed cards, connect four, guess who, I pod, and food so we wouldn't be bored on the flight. When I was done packing my mom asked ? Are you moving out?? The night before leaving I couldn't sleep. When I woke up that morning it was a beautiful spring day. The sun was shining brightly, and the clouds in the sky looked like giant marshmallows. I was so excited because this was my first time going on a vacation. I had already put my suitcases and bags in my car the night before. After I said my goodbyes to my family, I was on my way. I met with Lisa a... ...icking because we didn?t want to miss our flight. Randy called the company where he had rented the van from and they came to pick us up. We made it to the airport just in time because when we walked in the airport they called our flight. This made us very relieved. The flight home went just as well as the flight there except this time I didn't have the butterflies. Overall going on a vacation is something I want to do more in the future. I learned many things from this vacation such as even though you go with some people you don't know as well, you get to know them and by the end of the vacation it's like you have known them your whole life. This vacation brought my friend Lisa and I closer because we experienced things together. Going on a vacation with someone makes your relationship stronger and you find out many different likes and dislikes about each other.

Typical Life :: essays research papers

Typical Life   Ã‚  Ã‚  Ã‚  Ã‚  The Catcher in the Rye, by J. D. Salinger. The Catcher in the Rye is about Holden Caulfield. Just four days before the winter vacation Holden is kicked out from Pencey prep. School. He is kicked out from school for not passing most of his classes, except English class. Being alone bored out of his mind and not know what to do. Holden decides to go to New York by train. For about 3 days, and stay in a cheep hotel. Just to relax by himself till Wednesday. While Holden was at New York Holden smokes, gets drunk, goes to bars and tries to pick up females at a bar. While he tries to get drunk at most places he needs to lie about his age, also at the same time Holden shows how immature he is by the way he is talking to the three females at the bar. Also while staying at New York, Holden talk a lot about his little sister Phoebe. Holden goes to a Broadway, to buy a record for his little sister. Holden goes to a record store to waist some time before his date with Sally. H olden was suppose to meet Sally so they can go see a play together. After the play Holden goes to an ice skating ring with Sally, but they end up sitting in side and talking. Holden starts a conversation. Asking Sally: â€Å"If she ever got fed up?† And then Holden starts to tell her how this world is such a bad place and that all the adults are getting corrupted. And that when he (Holden) will be able to stop the kids from growing up he will be able to prevent the kids innocence’s and from growing up and save the world. In other words, threw out of the book Holden talk’s about his problems and how he feels about the world. At the end of the book Holden goes to the park and watches his little sister Phoebe on the coracle. And how he wishes that he could prevent Phoebe from learning bad things that she could see on the graffiti that is drawn on the walls.   Ã‚  Ã‚  Ã‚  Ã‚  I think that Holden Caulfield is a very unique teenager because he is a very ill person, yet at the same time he is very bright human being. Even though he is being kicked out of a lot of prep.

Types of Equipment Essay

1.1 Identify different types of equipment and their uses There are many different types of office equipment. The main ones found in most offices are: Chair – To sit on Desk – To sit at and rest Computer Monitor – pens – work etc. Also for storage. Telephone – To contact p Desk – It can be different size or shape depending of office needs. High Tec Telephone – It could be hand free set or just have different features such as: answering machine, calls on hold, address book and match more. High Tec Printer – It could include all in one functions, such as: scanner – scan from both sides printer – print color, print both sides, staple, print different sizes and different formats. photocopier – copy color, both sides, staple, can be zoomed in/out produce high volumes of printouts/copies very quickly File Cabinets – Different size for different office needs, can also be draws and be protected with lock. File trays – Can be the size for filing cabinets or good size for the use on my desc, also could be attached to walls for different paperwork. Computer – Can be with different size of screen, can be adjusted for ergonomic needs. Also could be portable. 1.3 Explain why different types of equipment are chosen for tasks Any equipment I choose will make the task take up as little as your time as possible so I could meet targets and deadlines, and also the equipment that can help me to complete the task to the best standard. Also not one piece of equipment can do everything, so it means I would need various types of office equipment to complete the task. An example of making a poster, I probably would use my computer, printer and laminator. 2: Understand the purpose of following instructions and health and safety procedures 2.1 Explain the purpose of following manufacturer’s instructions when using equipment The purpose to follow the manufacturer’s instructions for the following reasons: Failureto do so can invalidate the warranty of the piece of equipment – this could be very expensive for your company. The manufacturer knows the likely problemsand sets out the instructions to help you findthe solution in the quickest way possible. Following the instructions means that everyone will follow aset procedure. The engineer will thenbe able to work out what you have done andin whatorder. 2.2 Explain the purpose of following organisational instructions when using equipment Failure to follow organisational instructions can result damage or injury, or even failure to get the proper outcome from using the equipment. It is important that I produce my work to best possible way to meet requirements  of the person who set the task. This shows I’m responsible and I can be relied upon to get things done. I will also needto be aware oforganisationalprocedures relating tosolvingequipment problems.This isbecause they may: set out who I must inform of the problem  give instructions as to who is and is not allowed to take action limit what staff may do 2.3 Identify health and safety procedures for using different types of equipment I must make myself aware of the potential hazards of any operation I may carry out, or any equipment I may use. In addition I must be aware of self operating rules, working procedures, instructions etc. I must not interfere with any item of equipment I’m not duly authorised to use it or maintain. I must use the right equipment for the job and keep the equipment tidy and in good working condition. I must use suitable safety equipment if needed. I must report any faults or damage to relevant staff or my Line Manager immediately. 2.4 Explain the purpose of following health and safety procedures when using equipment To stay healthy and safe. To avoid injury. To prevent or at least limit harm to people around me. To protect equipment and facilities. To get the most accurate results from the equipment 2.5 Explain the purpose of keeping equipment clean and hygienic The purpose is for equipment to run faster and more efficiently. The standards are no dust on the machinery and also to keep it at a reasonable temperature. Also it is important to keep it clean and hygienic which means it is free from dirt, germ and bacteria. for example, food and drink should be kept well away from any equipment in case anything get knocked over and causes damage. if you spill something over or near a piece of equipment you should clean it up straight away. 3: Understand how to use equipment in a way that minimises waste 3.1 Give examples of waste when using equipment An example of waste when using office equipment is when most of employees leave their computers on standby all night. Even when though it is on standby, they are still using electricity. Also printing out multiple copies of documents to find that there are spelling mistakes so they will need to be discarded as waste. 3.2 Give examples of ways to reduce waste There are many ways that a company can cut down on waste, they can do things like double sided printing, double checking work before printing and doing a test print before printing out multiple documents will cut down waste of paper and ink. 3.3 Explain the purpose of minimising waste Keeping waste to a minimum in the business environment serves the same purposes it does everywhere else: it decreases the amount of waste a business contributes to the environment Reducing waste is key to minimizing an individual’s or business’s environmental impact by reducing air and water pollution and limiting the amount of material that ends up in landfills. Reducing waste can also serve to save a business money. By enacting plans that conserve materials, they will inevitably cut down on the amount of materials they need to purchase. Likewise, any attempt to reduce carbon emissions inevitably relies on a reduction of energy use, which means less money spent on electricity and fuel. The advantage of applying waste minimization principles in a business environment is that it impacts a larger number of people than would applying them in one’s home. Such  actions can also serve to improve a business’s image. 4: Know about the different types of problems that may occur when using equipment and how to deal with them 4.1 Give examples of equipment problems There are many things that can go wrong when using office equipment such as: paper jams, most of the time it can be easily solved, but there might be times when have to be reported and have to call out engineer, as paper could be in one of the operating units where I wouldn’t be able to access it, or it could also be a damage of the unit. network connection problems, if it goes on for some time, I would have to report it to our IT team to take a look at it. running out of toner/ink when using the printer/scanner/photocopier, this can be easily solved by replacing toner/ink units. 4.2 Explain the purpose of following manufacturer’s instructions and organisational procedures when dealing with problems It is important follow manufacturer’s instructions and organisational procedures as servicing faulty equipment can be very expensive, and not following instructions often results in a problem. The more problems are caused, the more money company have to spend and it also affects work quality, as equipment fault or even breakdown can delay my work deadlines. The company I work for have to follow established procedures to operate efficiently. 4.3 Give examples of how to deal with problems Example of my computer being crashed – Make sure my documents are set to auto-save every 10 minutes to prevent loss of work I’ve done. Example of a printer, my printed document is smudged – The ink cartridge is running low and it needs to be replaced. The paper jam – Manually remove the jammed paper from the printer. Always follow the instructions given on the printer screen, open printer in correct order. 5: Understand the purpose of meeting work standards and deadlines 5.1 Explain the purpose of meeting work standards and deadlines when using equipment A goodexample of the importance ofmeeting work standards when usingoffice equipment concerns the use of company email.Most office staff use email regularlythroughout the dayto contact other members of staff, as well as external customers and suppliers and dealers. There are company standards on the use of email which will indicate the correct language to be used – slang, text speak and bad language are never acceptable when emailing at work. The use of personal email during work times will also be subject to limits and will almost certainly bemonitored. Companies can and do monitor staff use of email usingspecial softwareprograms which will flag up certain words orphrases – so, be aware, and never assumeanything I put in an email is private. The company I work for always have deadlines by which certain tasks must be completed. Deadlines areimportant for staff as they tell them when things need to becompleted in order that the business can meet its KPI’s ( targets ). 6: Understand the purpose of leaving equipment and the work area ready for the next user 6.1 Explain the purpose of leaving equipment and the work area ready for the next user Whenever I finish using officeequipment it is important that you leave the work area exactly asyou found it. This means: I can’t leave any mess lying around I can’t leave the workarea insuch away that someone else has to clear up after you before they can begin usingthe equipment. Imagine that I had to print 100 copies of a attachments for payslips. When you arrive at the printer ready to collect your printouts, I find that my  work is all mixed up with someone else’s, which has simply been left on the printer. This examplehighlights the point that takingcare totidy away aftermyself is a necessary partof working with othersand sharing equipment. If everyone simply left their work lying around, it would not be long before the whole office was totallyunusable.

International risk management Essay

A Letter of Credit is a document issued by a bank at the request of its customer promising to pay the exporter for the goods and services provided that the exporter provides all the documents as stated in the terms and conditions. To the exporter a letter of credit guarantees payment and reduces production risk if the buyer has a change of his order. It ensures that buyers cannot refuse to pay due to complain raised over the goods. It also provides a chance to get financing incase of delayed payment. The importer can structure their payment plan, it helps confirm the shipment of the goods, helps them reduce pre-payment, it as well ensures that the exporter delivers exactly what the importer required it also creates confidence for bigger transactions in future. A bill of exchange is a document that acts as the evidence of a debt and informs the importer to pay the exporter a certain fixed sum of money at a certain specific time. They act as a guarantee that goods of certain stated specifications have been shipped and that and that that require payment. The Export-Import Bank of United States of America helps in financing sales of goods and services by proving guarantee of working capital loans, it helps crate jobs through export of goods, the bank guarantees the repayment of loans to foreign purchasers, it also provides credit insurance for U. S. exporters against. The disadvantage of the Export-Import Bank is that for it to support the products at least 50 percent of them must be from U. S and they should not have any negative effect to the economy. It also does not offer help to importers outside U. S. In conclusion, the letter of credit, the bill of exchange and the Export-Import Bank are very important for the import-Export business to prosper not only in U. S but also any where in the world.